Develop ineo 163 - Page 162

5
Making copies
5-64 ineo 163/213
– If "MANUAL" was selected, press the [*] or [)] key until one of the
nine density levels is selected, and then press the [OK] key.
The main screen appears again.
4 If necessary, specify any other copy settings.
– Refer to "Selecting the paper source" on page 5-13.
– Refer to "Before making copies" on page 4-3.
– Refer to "Advanced copy operations" on page 6-3.
5 Press the [Start] key.
DENSITY(TEXT)
MANUAL
AUTO
OK