5
Making copies
5-66 ineo 163/213
3 If necessary, specify any other copy settings.
– Refer to "Selecting the paper source" on page 5-13.
– Refer to "Specifying a zoom setting" on page 5-53.
– Refer to "Selecting a density setting" on page 5-62.
– Refer to "Advanced copy operations" on page 6-3.
4 Using the keypad, type in the desired number of copies, and then press
the [Start] key.
Printing for the interrupting job begins.
5 After copying of the interrupting job is finished, press the [Interrupt]
key.
The indicator on the [Interrupt] key goes off, and the machine returns
to the mode before the operation was paused.
6 Reload the document that was removed in step 2.
– For printing from the computer, continue with step 7.
7 Press the [Start] key.
The interrupted copy/print job or computer printing job continues.
To Next Page
Loading...
