Advanced copy operations
6
ineo 163/213 6-9
4 Press the [+] or [,] key until "SORT" or "GROUP" is selected, and then
press the [OK] key.
The indicator on the [Finishing] key lights up.
5 If necessary, specify any other copy settings.
– Refer to "Before making copies" on page 4-3.
– Refer to "Advanced copy operations" on page 6-3.
6 Using the keypad, type in the desired number of copies, and then press
the [Start] key.
7 Place the next document page on the original glass, and then press the
[OK] key.
– Repeat this step for all pages of the document.
The number of document pages that have been scanned is displayed.
8 Press the [Start] key.
2
Note
If no Finishing setting is selected, the indicator on the [Finishing] key does
not light up.
COPY FINISHING
SORT
NON-SORT
GROUP
PAPER:
ZOOM :100%
NEXT PAGE?
SCAN=OK (PRN=START)
To Next Page
Loading...
