6
Advanced copy operations
6-30 ineo 163/213
– The width of the erased area can be changed using the "MARGIN
SETTING" parameter in the Utility mode. (Refer to "Adjusting the
margin width ("MARGIN SETTING" parameter)" on page 7-65.)
"/" appears beside "PAGE MARGIN" in the COPY FUNCTION menu.
5 Press the [Back] key.
The main screen appears again. The indicator on the [Function] key
lights up.
6 If necessary, specify any other copy settings.
– Refer to "Before making copies" on page 4-3.
– Refer to "Advanced copy operations" on page 6-3.
7 Using the keypad, type in the desired number of copies, and then press
the [Start] key.
To Next Page
Loading...
