Utility mode/Copy mode parameters
7
ineo 163/213 7-11
3 Press the [+] or [,] key until "OFF" or "ON" is selected.
– If "OFF" was selected, press the [OK] key.
– If "ON" was selected, use the keypad to type in the length of time
until the auto shut-off operation is performed, and then press the
[OK] key.
– If the "AUTO SHUT OFF" parameter in the "ADMIN.
MANAGEMENT" menu is set to "DISABLE", "OFF" cannot be
selected.
– The time can be set between 15 and 240 minutes.
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
The "MACHINE SETTING" menu appears again.
AUTO SHUT OFF
ON
OFF
AUTO SHUT OFF
ON
OFF
30min(1-240min)
To Next Page
Loading...
