7
Utility mode/Copy mode parameters
7-38 ineo 163/213
4 Press the [+] or [,] key until the desired ADMIN. MANAGEMENT
parameter is selected, and then press the [OK] key.
– [NETWORK SETTING], [E-MAIL SETTING 1], [E-MAIL SETTING 2]
and [USER SETTING] appear only when optional image controller
IC-206 or network interface card NC-503 is installed.
– The following ADMIN. MANAGEMENT parameters are available.
ADMINISTRATOR NO.
AUTO SHUT OFF
ACCOUNT TRACK
NETWORK SETTING
E-MAIL SETTING 1
E-MAIL SETTING 2
USER SETTING
To Next Page
Loading...
