Utility mode/Copy mode parameters
7
ineo 163/213 7-49
– To delete the number, press the [Clear/Stop] key, and then select
"YES" in the screen that appeared.
7 Use the keypad to type in the new number, and then press the [OK]
key.
– If the entered account number is already registered, the message
"REGISTERED!" appears.
– To change/delete another number, repeat steps 6 and 7.
8 After the numbers have been changed/deleted as desired, press the
[Back] key three times.
The "ADMIN. MANAGEMENT" menu appears again.
ACCOUNT NO. EDIT
ACCOUNT NO.:112
To Next Page
Loading...
