When a message appears
8
ineo 163/213 8-23
UPPER TRAY FULL
REMOVE PAPER
(PRESS ANY KEY)
If the optional job separator is
installed and the paper in the
upper output tray has reached
the maximum capacity, copy-
ing/printing cannot continue.
Remove all paper from the up-
per output tray of the job sepa-
rator.
TRAY MOVEMENT ERROR
(PRESS ANY KEY)
The optional job separator is in-
stalled and the paper in either
the upper output tray or the
lower output tray of the job
separator has reached the
maximum capacity when the
machine is turned on or when
copying/printing begins.
Remove all paper from the up-
per output tray and lower out-
put tray of the job separator,
and then press any control
panel key.
MAINTENANCE CALL (M1) A maintenance is due. Contact your service repre-
sentative.
MAINTENANCE CALL (M2) The PC drum unit should be re-
placed.
Contact your service repre-
sentative.
SET PLUG-IN COUNTER A counter key is not inserted. Insert the counter key.
MACHINE TROUBLE
SERVICE CALL (C####)
Some problem occurred in the
machine.
Turn the machine off, then on
again. If the error is still dis-
played, contact your service
representative.
Message Cause Remedy
To Next Page
Loading...
