About the Control Panel2-10
3 Scan data desti-
nation
Indicates the specified destination for the scan data.
For details on specifying the destination of the data,
refer to “Specifying the Data Location” on
page 7-10 and “Specifying the Destination Address
(Scan to E-mail/FTP/SMB)” on page 7-12.
d
If no destination has been specified, [SCAN
TO] appears.
4 Single-sided/
double-sided
scanning
Indicates whether double-sided scanning or sin-
gle-sided scanning is selected. For details on
selecting double-sided/single-sided scanning, refer
to “Setting Duplex (Double-Sided) Scanning” on
page 7-30.
5 Scan size Indicates the scan size that is selected. For details
on selecting the scan size, refer to “Setting the Scan
Size” on page 7-31.
6 Scan color Indicates the scan color that is selected. For details
on selecting the scan color, refer to “Setting the
Scan Color” on page 7-31.
7 [SUBJECT] Select this menu item to specify the subject. For
details on specifying the subject, refer to “Specify-
ing the Subject” on page 7-31.
d
This menu item does not appear if an FTP
address or SMB address was specified as the
destination.
8[CANCEL
RESERV.]
Select this menu item to display the list of jobs
queued for transmission and to delete a job. For
details, refer to “Deleting a Queued Transmission
Job” on page 7-32.
d
This menu item does not appear if an e-mail
address, FTP address or SMB address was
specified as the destination.
No. Indication Description
To Next Page
Loading...
