Configuration Menu Overview 2-27
d
Manufacturer’s default settings appear in bold.
[TRAY1 PAPER] Media type [PLAIN PAPER] / [THICK PAPER] /
[THICK PAPER2] / [LABELS] / [LETTER-
HEAD] / [GLOSSY] / [GLOSSY2] / [SIN-
GLE SIDE ONLY] / [SPECIAL PAPER] /
[ENVELOPE] / [POSTCARD]
Paper size When a setting other than [ENVELOPE]
or [POSTCARD] is selected: [A4] / [A5] /
[B5] / [LEGAL] / [LETTER] / [G LETTER]
/ [STATEMENT] / [EXECUTIVE] / [FOLIO]
/ [G LEGAL] / [8 1/2 x 13 1/2] / [CUS-
TOM]
When [ENVELOPE] is selected:
[COM10] / [C6] / [DL] / [MONARCH] /
[CHOU#3] / [CUSTOM]
When [POSTCARD] is selected:
[J-POSTCARD 100x148] / [D-POST-
CARD 148x200] / [CUSTOM]
Select the type and size of the media loaded into Tray
1. If [CUSTOM] is selected as the paper size, specify
settings for [LENGTH] and [WIDTH] separately.
The Setting range for [LENGTH] is 148 to 356 mm.
The default setting is [297] mm.
The Setting range for [WIDTH] is 92 to 216 mm.
The default setting is [210] mm.
When a media type is selected, a screen appears,
showing the available media sizes. The available
media sizes differ depending on the selected media
type.
The default setting is [A4] for 220 V models, and
[LETTER] for other models.
d
The setting for [CUSTOM] is displayed in
metric (mm) even if [ADMIN. MANAGEMENT]/
[USER SETTING]/[PRESET ZOOM] is set to
[INCH].
To Next Page
Loading...
