Configuration Menu Overview2-28
[TRAY2 PAPER] Media type [PLAIN PAPER] / [THICK PAPER] /
[THICK PAPER2] / [LABELS] / [LETTER-
HEAD] / [GLOSSY] / [GLOSSY2] / [SIN-
GLE SIDE ONLY] / [SPECIAL PAPER] /
[POSTCARD]
Paper size When a setting other than [POSTCARD]
is selected: [A4] / [A5] / [B5] / [LETTER]
/ [G LETTER] / [STATEMENT] / [EXECU-
TIVE] / [CUSTOM]
When [POSTCARD] is selected:
[J-POSTCARD 100x148] / [D-POST-
CARD 148x200] / [CUSTOM]
Select the type and size of the media loaded into Tray
2. If [CUSTOM] is selected as the paper size, specify
settings for [LENGTH] and [WIDTH] separately.
The Setting range for [LENGTH] is 148 to 297 mm.
The default setting is [297] mm.
The Setting range for [WIDTH] is 92 to 216 mm.
The default setting is [210] mm.
The default setting is [A4] for 220 V models, and
[LETTER] for other models.
d
The setting for [CUSTOM] is displayed in
metric (mm) even if [ADMIN. MANAGEMENT]/
[USER SETTING]/[PRESET ZOOM] is set to
[INCH].
[TRAY3 PAPER] Media type [PLAIN PAPER] / [SINGLE SIDE ONLY]
/ [SPECIAL PAPER]
Select the type of the media loaded into Tray 3.
To Next Page
Loading...
