OPERATOR’S MANUAL
NOTE: The Enter button will not select
a text field.
LABEL ENTRIES
1.
To create label names, such as a Material Name, highlight the field and
begin typing the name. A virtual keyboard displays onscreen and the
name as entered appears at top of the virtual keyboard.
2.
Press the Enter button to accept the label entry.
Figure 49
Virtual Keyboard
Usingthekeyboard
up/downarrow
buttonsselectand
highlighta
parameter
Material
Label
50 / FLEX4 PROTM PROGRAMMING
Flex4 Pro
TM
Control System
6010541 Rev A
To Next Page
Loading...
