Dickey-John Flex4 Pro - Page 78

OPERATOR’S MANUAL
Figure 66
Road Temperature Sensor
IMPORTANT: The Road Watch
TM
temperature sensor or Surface
Patrol
TM
temperature sensor must be disconnected and
the Flex4 Interface cable and the DICKEY-john
temperature sensor adapter connected to the main
harness for successful calibration. If the interface cable
and the DICKEY-john temperature sensor adapter is
disconnected when the calibration is performed, an
error screen displays.
NOTE: Road Watch
TM
is a registered
trademark of Commercial
Vehicle Group TM. Surface
Patrol Technology is a
registered trademark of Control
Products Inc.
Figure 67
Road Temperature Sensor Calibration
Flex4 Pro
TM
Control System
6010541 Rev A
SYSTEM PROGRAMMING / 75