Digi SM-720 - Weigh & Measure Specification - SPEC 195, 264, 265, 269

SM-500V2 Service Manual Edition 5
152
SPEC 668: 16x16 COM NAME
0: 1.0 SEC DISPLAY
1: 1.5 SEC DISPLAY
2: 2.0 SEC DISPLAY
3: 0.5 SEC DISPLAY
SPEC 669: MASK WEIGHT DISPLAY
0: NO
1: YES
SPEC 670: SCROLL MESSAGE DISPLAY
0: FULL LENGTH
1: HALF LENGTH
SPEC 671: DISPLAY CPU SELECTION
0: DISPLAY CPU BELOW VER 0.16
1: DISPLAY CPU VER 0.16 AND ABOVE
SPEC 672: KEYBOARD SELECTION
0: NORMAL KEYBOARD
1: 100 PRESET KEYS KEYBOARD
2: 80 PRESET KEYS KEYBOARD
SPEC 673: HANGING SCALE
0: NO
1: YES
SPEC 674: SELECTION OF MASKING LAST DIGIT OVER 15LB
0: NO
1: YES
SPEC 675: AUTO ZERO ADJUSTMENT RANGE
0: ± 5d
1: 2% OF CAPACITY
SPEC 676: SELECTION OF RIGHT SIDE BARCODE DATA RIGHT SHIFT FOR ITEM AND TOTAL
BARCODE
0: NO RIGHT SHIFT
1: RIGHT SHIFT
2: RIGHT SHIFT TWICE
3: LEFT SHIFT TWICE
4: LEFT SHIFT 3 TIMES
5: LEFT SHIFT
SPEC 677: MANUAL WEIGHT FUNCTION KEY
0: DISABLE
1: ENABLE
SPEC 678: PRINTING OF ITEM LABEL AFTER WEIGHT CHANGE
0: INHIBIT
1: ALLOW
SPEC 679: CATTY AND TAEL (TAIWAN)
0: DISABLE
1: ENABLE
SPEC 680: TARE CLEAR WHEN EXIT FROM Z, PASSWORD MODE AND CHANGING OF
SPECIFICATIONS (REZERO+141 & REZERO+142)
0: NO
1: YES
SPEC 681: EURO SECOND PRICE ROUNDING METHOD
0: ROUNDING
1: TRUNCATING
2: CUT UP