Digi SM-720 - Revision Records

SM720 Service Manual Edition 5
155
15. REVISION RECORDS
REVISION RECORDS
Serial
No
Date
Rev.
Status
Description of Changes
Software
Version
Remarks
001 Mar ‘06 00 Tentative
Edition
002 July ‘06 01
1) Add Firmware Upgrade, Maintenance,
Hardware Setting, Miscellaneous, Block
Diagram, and Specifications and add 30Kg
disassembly.
V29.246 Edition 1
003 Apr ‘07 02
1) Edit Safety Information and adding Safety
Regulations message.
2) Edit the Printing Speed spec.
3)
Change the Cash Drawer Mini Dim connector to
RJ11 connector.
4) Change the IBM Keyboard connector to PS2
Keyboard connector.
5) Adding the TDP, TEB, TEV and Hanging type
dimension drawing.
6) Adding the Exploded View of Pole, Bench and
Hanging type.
7) Adding the Hanging Type Disassembly.
8)
Adding the Treatment of hazardous material.
9)
Wireless LAN Kit Installation and WLAN
Configuration.
V29.246 Edition 2
004 Jun ‘07 03
1) Adding the Hanging scale LAN Kit installation
and WLAN Configuration.
2) Change the DP, EB, EV, TDP, TEB, TEV and
Hanging type dimension.
3) Adding the BS (Self Service type) scale
dimension.
V29.246 Edition 3
005 Aug ‘08 04
1) Adding France Language in Safety Information.
2)
Add Information of Default Country Spec Setting,
Calibration, User Setup Setting and IP Address
Setting for Touch Pole, Touch Bench and Touch
Elevated Type.
3) Add Information of Hardware Setting and
Adjustment for Touch Pole, Touch Bench and
Touch Elevated Type.
V29.246 Edition 4
006 Aug ‘09 05
1) Adding the Shift between New and Old Type
Customer Display LCD to Activated.
2)
Remove the 108 key from specification.
3)
Change the Cash Drawer Pin 3 & Pin 5 to Not
Connection.
4) Removing RS485 and Ethernet Test from
Diagnostic test function.
5) Remove the 4MB memory extension board
change to 8MB memory extension board in
specification.
6)
Remove the 72mm Printer option from
specification.
7) Adding the BS type Block diagram.
8)
Change the Power AC supply auto switching to
manual set by jumper setting.
V29.431 Edition 5