SM-500V2 Service Manual Edition 5
104
12. TREATMENT AND RECOVERY OF WEEE
12.1 Component listing of Hazardous Material
To all user of DIGI product in the European Union
Thank you for using DIGI product.
Product marked with this symbol indicates that it was sold on or after 13th August 2005, which means it should not be disposed of with general household
waste. Please note that our product is for industrial/professional use only.
Treatment and recovery of WEEE involves removing hazardous substances (such as those covered in the RoHS Directives) as well as PCBs and liquids.
Only licensed operators meeting WEEE regulations will be able to handle and recover WEEE.
Please contact your DIGI office or DIGI distributor when the product has reached the end of its life. They will advise you regarding the product take-back.
With your co-operation we are aiming to reduce environmental pollution from waste electrical and electronic equipment and preserve natural resource through
re-use and recycling. Please do not hesitate to ask your DIGI office or DIGI distributor, if you require further information.
Items required to be removed from product at end of product life as listed in WEEE Annex II
Items Y N Identification Removal
procedure
Comments
o Fluids