Digi SM-720 - Hardware Testing for Pole, Bench, Elevated Types; RAM Read and Write Test

SM720 Service Manual Edition 5
30
4.2.3 User Spec Setup Procedure
To Change the setting of the User SPEC, if there is some SPEC need to alter.
Procedure Picture
1) In [Operation Menu] mode, touch [User Setup] icon.
2) Touch [Yes].
3) The Spec Setup screen will display and touch the “Square” icon to
go to spec setting.
4.2.4 IP Address Setting
Procedure Picture
1) In [Operation Menu] mode, touch [User Setup].
2) Touch [Yes].