Digi TransPort - Page 219

Configure DSL interfaces
Digi TransPort User Guide 219
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
ppp 1 description Free text Description
ppp 1 username Free text Username
ppp 1 password Free text Password
ppp 1 do_nat 1 ON Enable NAT on this interface
(IP Address)
ppp 1 do_nat 2 ON Enable NAT on this interface
(IP Address and port)
ppp 1 natip IP Address NAT Source IP Address
ppp 1 ipsec ON/OFF Enable IPSec on this interface
ppp 1 firewall ON/OFF Enable the firewall on this interface
ppp 1 dlwarnkb Kbytes/
Mbytes/
GBytes
Issue a warning event after
ppp 1 dlstopkb Kbytes/
Mbytes/
GBytes
Stop data from being transmitted
after x Bytes data
ppp 1 dlrstday 1-28 Reset the data limit on the nth day
of the month