Digi TransPort - Page 262

Configure DialServ interfaces
Digi TransPort User Guide 262
ppp n sectransDNS Valid IP address
a.b.c.d
Secondary DNS server a.b.c.d
ppp n ans OFF,ON Allow this PPP interface to answer
incoming calls
ppp n do_nat 0,1,2
0=Disabled
1=IP address
2=IP address
and port
Enable NAT on this interface
IP address/IP address and Port
ppp n natip Valid IP address
a.b.c.d
NAT Source IP address a.b.c.d
ppp n ipsec 0=Disabled
1=Enabled
2=Enabled and
Keep SAs
Enable IPsec on this interface/
Keep Security Associations when
this DialServ interface is
disconnected
ppp n firewall OFF,ON Enable the firewall on this interface
Entity Instance Parameter Values Equivalent Web Parameter