Digi TransPort - Page 299

Configure Advanced interfaces settings
Digi TransPort User Guide 299
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
ppp n name Free text field Description
ppp n l1iface The layer 1
interface, such
as Async Port,
PPTP, W-WAN
This PPP interface will use
ppp n l1nb Layer 1
Interface
number
Default: 0
This PPP interface will use value
ppp n l2face The lower layer
interface, such
as. LAPB, LAPD,
XOT
This PPP interface will use
ppp n l2nb Lower layer
interface
number.
Default: 0
ppp n aodinua
ppp n phonenum up to 25 digits Dial out using numbers
ppp n ph2 up to 25 digits Dial out using numbers
ppp n ph3 up to 25 digits Dial out using numbers
ppp n ph4 up to 25 digits Dial out using numbers
ppp n prefix 0-9999999999 Prefix n to the dial out number
ppp n username Valid username Username
ppp n password Valid password Password
ppp n epassword The encrypted
password
None-this parameter is not
configurable
ppp n r_addr Default 0.0.0.0
set
automatically
Allow the remote device to assign a
local IP address to this router
ppp n IPaddr Valid IP address
a.b.c.d
Try to negotiate a.b.c.d as the local
IP address for this router
ppp n l_addr Valid IP address
Default 1.2.3.4
Use a.b.c.d as the local IP address
for this router