Configure Dynamic DNS
Digi TransPort User Guide 345
Service Provider
Selects the Dynamic DNS service provider. Dynamic TransPort routers support the Dynamic
DNS services Dynamic DNS (at dyn.com) No-IP (at noip.com). TransPort routers may be
compatible with other Dynamic DNS services, which can be selected by setting the
Service Provider setting to Other. For more information about Dynamic DNS services,
including other service providers, see this article:
https://en.wikipedia.org/wiki/Dynamic_DNS
Host and Domain Name(s)
Up to five host/domain names that are to be updated using the service.
Destination port #
The IP port to use as the destination port. The default value is 0 which causes the router to use
the default port number which is port 80.
DynDNS User Name
The username to use when updating the hostnames. This will have been supplied by the
service provider.
DynDNS Password
The password to use when updating the hostnames. This will have been supplied by the
service provider.
Confirm DynDNS Password
Enter the password into this text box to confirm it.
DynDNS DDNS System
The value selected from this drop-down list is used to identify the dynamic DNS system
containing the hostnames to be updated. The available options are:
•Dynamic DNS
• Static DNS
• Custom DNS
When default route/interface x,y becomes active, send DDNS update
The radio buttons select whether or not the router should use the default interface or the
interface specified from the drop-down list. If the specified interface option is selected, the
required interface is selected from the drop-down list and the interface instance is entered
into the adjacent text box. If the default interface is selected, the client will keep track of and
use the current default route.
To Next Page
Loading...
