Digi TransPort - Page 346

Configure Dynamic DNS
Digi TransPort User Guide 346
Use Wildcards
Selects whether or not wildcard matching on the hostname will be performed. The options
are:
• Disable wildcards
•Enable wildcards
• No change to service settings
When enabled, the Dynamic DNS service will match DNS requests of the form *.hostname
where * matches any text. For example, if Hostname1 was set to site.dyndns.com and
wildcard matching was enabled, than www.site.dyndns.com would resolve to the interface
address.
Related CLI commands
Entity Instance Parameter Values Equivalent Web Parameter
dyndns 0 hostname1 Up to 40 characters Host and Domain Name(s)
dyndns 0 hostname2 Up to 40 characters Host and Domain Name(s)
dyndns 0 hostname3 Up to 40 characters Host and Domain Name(s)
dyndns 0 hostname4 Up to 40 characters Host and Domain Name(s)
dyndns 0 hostname5 Up to 40 characters Host and Domain Name(s)
dyndns 0 port 0 - 65535 Destination port #
dyndns 0 username Up to 20 characters DynDNS User Name
dyndns 0 password Up to 25 characters DynDNS Password
dyndns 0 system Blank, statdns,
custom
DynDNS DDNS System
dyndns 0 ifent Blank,ETH,PPP When default route/interface
x,y becomes active, send DDNS
update
dyndns 0 ifadd 0 -2147483647 When default route/interface
x,y becomes active, send DDNS
update
dyndns 0 wildcard 0,1,2
0=Disable wildcards
1=Enable wildcards
2=No change to
service settings
Use Wildcards