Digi TransPort - Page 400

IPsec parameters
Digi TransPort User Guide 400
eroute n espenc off, null, des,
3des, aes
Use enc encryption on this tunnel.
eroute n enckeybits 128, 192, 256 Use enc encryption on this tunnel.
eroute n espauth off, md5, sha1 Use auth authentication on this
tunnel.
eroute n dhgroup 0, 1, 2, 3 Use Diffie Hellman group.
eroute n ikever 1, 2 Use IKE n to negotiate this tunnel.
eroute n ikecfg 0, 1 Use IKE configuration.
eroute n autosa 0=On Demand
1=When a route
to the
destination is
available
2=All the time
Bring this tunnel up.
eroute n nosa drop, pass, try If the tunnel is down and a packet is
ready to be sent.
eroute n inact_to Integer Bring this tunnel down if it is idle for h
hrs m mins s secs.
This CLI value is entered in seconds
only.
eroute n ltime Integer Renew the tunnel after h hrs m mins s
secs.
This CLI value is entered in seconds
only.
eroute n lkbytes Integer Renew the tunnel after n units of
traffic.
This CLI value is entered in Kbytes
only.
Entity Instance Parameter Values Equivalent Web Parameter