Configure X.25 parameters
Digi TransPort User Guide 542
X3 parameters
Each PAD configuration page has an attached sub-page that allows you to edit the X.3 PAD
parameters. These pages allow you to load one of the standard profiles or edit the individual
parameters to suit your application requirements and save the resulting customized user profile
to non-volatile memory.
Loading and Saving PAD Profiles
To create your own PAD profiles, edit the appropriate parameters and then select user profile
1, 2, 3 or 4 as required from the list and click the Save Profile button. Each PAD profile page
includes two list boxes that allow you to load and save PAD profiles. To load a particular
profile, select the profile from the list and click the Load Profile button. The parameter table
is updated with the values from the selected profile.
To Next Page
Loading...
