DISPLAY MESSAGES AND FAULT FINDING
4--6 27080 Issue 1 August 98
Could not find message to be printed
Message does not exist.
Select a new message.
Could not find message to be updated
Message to be updated does not exist.
Select a new message.
Could not find message to clear queue
Message queue is already empty.
Send new message.
Could not prepare message for printing
Selectedmessageisnotinavalidformatforthecurrentlyselected
font and raster.
Send new message.
EEPROM write failed
The EEPROM (a hardware device used by the printertostorethe
ink life data) has failed.
If fault persists, call Domino Service.
Excess pump overspeed
Ink pressure is being maintained but pump speed is excessive.
Check ink system for leaks or worn pump.
Excess pump underspeed
Ink pressure is being maintained but pump speed is too low.
Checkinksystemforblockages,kinkedtubes,badlyformed
connections, etc.
Excessive ink pressure
Ink pressure is too high. Blocked jet pump.
Refurbish jet pump.
Failed to write to store file
Message store is full or corrupted.
Delete unused messages or restore the contents from
backup.
To Next Page
Loading...
Need help?
General
