Draytek VigorAP 906 User Manual

80
address from the designated DHCP server.
Specify a DHCP server in this field. All the IP addresses of the
devices on the LAN of VigorAP will be assigned via such specified
server. It is used to avoid IP assignment interference due to
multiple DHCP servers in one LAN.
DNS Server IP Address
Primary DNS Server - You must specify a DNS server IP address here
because your ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the modem will automatically
apply default DNS Server IP address: 194.109.6.66 to this field.
Secondary DNS Server - You can specify a secondary DNS server IP
address here because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the modem will automatically
apply default secondary DNS Server IP address: 194.98.0.1 to this
field.
After finishing this web page configuration, please click OK to save the settings.

Draytek VigorAP 906 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Number of users	254 user(s)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	2402 Mbit/s
Maximum data transfer rate (2.4 GHz)	574 Mbit/s
Placement	Ceiling, Table, Wall
Product color	White
Security algorithms	WEP, WPA, WPA2, WPA3, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	5
Antenna type	External
Antenna direction type	Omni-directional
Antenna gain level (max)	2.5 dBi
Input current	0.4 A
Output current	1.5 A
AC input voltage	48 - 56 V
DC voltage range	12 V
Power consumption (max)	17.3 W
Sustainability certificates	CE