Copyright 2008 Baker Hughes Company.
English–PACE5000/6000 Instruction Manual | 53
Supervisor Setup
b. Press the top touch pad on the screen to enter the ADDRESS TYPE screen.
c. Use the UP and Down arrows to highlight the desired address type (either AUTO IP or
STATIC).
d. Press the top touch pad on the screen to set the new address type. The screen
automatically returns to the ETHERNET PARAMETERS screen.
8. To change the host name, complete the following:
a. On the ETHERNET PARAMETER screen, use the UP and DOWN arrows on the right
of the screen to highlight the HOST NAME field.
b. Press the top touch pad on the screen to enter the HOST NAME screen.
To Next Page
Loading...
