DURKOPP ADLER 1767 Service Instructions

Positioning the arm shaft
28 Service Instructions 1767 - 00.0 - 12/2016
To position the arm shaft:
1. Loosen the threaded pins (3).
2. Turn the arm shaft so that the threaded pins (3) are seated flush on
the flat.
3. Position the arm shaft so that the face of the arm shaft (5) is flush with
the face of the crank (4).
4. Tighten the threaded pins (3).

DURKOPP ADLER 1767 Specifications

General

Brand	DURKOPP ADLER
Model	1767
Category	Sewing Machine
Language	English