Feed dog
44 Service Instructions 1767 - 00.0 - 12/2016
9.2 Setting the feed dog movement
The feed dog moves in an elliptical cycle. To align this correctly, the feed
movement and the stroke height and the stroke movement of the feed dog
all have to be set.
Order
First, check the following setting:
• Feed dog position ( p. 41)
9.2.1 Setting the feed eccentric
Cover
• Remove the front cover ( p. 18)
Fig. 30: Setting the feed eccentric
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the feed dog
movement.
(1) - Locking pin
(2) - Markings
(3) - Eccentric
(4) - Screws
To Next Page
Loading...
