DURKOPP ADLER 1767 Service Instructions

Maintenance
Service Instructions 1767 - 00.0 - 12/2016 105
20 Maintenance
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
Maintenance interval
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Work to be carried out Operating hours
8 40 160 500 1000
Machine head
Remove fluff, lint and thread remnants 
Clean the motor fan mesh 
Check the oil level 
Lubricating the gear 
Pneumatic system
Check the water level in the pressure controller 
Check the filter element in the maintenance unit 
Check the tightness of the system 

DURKOPP ADLER 1767 Specifications

General

Brand	DURKOPP ADLER
Model	1767
Category	Sewing Machine
Language	English