DURKOPP ADLER 1767 - Setting the operating pressure

Programming
Service Instructions 1767 - 00.0 - 12/2016 93
Sewing foot lift after
sewing stop
• Activates or deactivates
the sewing foot lift after
sewing stop
 p. 100
Soft start • Activates or deactivates
the soft start
 p. 101
Speed • Reduces the motor
speed
 p. 101
②
Function button • Activates or deactivates
any stored function
③
Programming button group
ESC • Ends parameter mode
A+ • Increases parameter
• Changes user level
• Selects subprogram
B+ • Increases parameter
• Changes to next higher
category
• Selects subprogram
C+ • Increases parameter
• Selects subprogram
D+ • Increases parameter
• Selects subprogram
OK • Calls parameter or
saves it
P • Starts or ends the
parameter mode
A- • Decreases parameter
• Changes user level
• Selects subprogram
No. Button Function Reference