Programming
140 Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Fig. 110: Perform software update
3. Switch on the machine at the main switch.
The machine automatically starts the software transfer. During the
transfer, the display only shows the firmware version (3) of the control
panel on the left.
Fig. 111: Perform software update
As soon as the software update is finished, the display will also show
the software version (4) of the machine on the right.
Fig. 112: Perform software update
4. Wait until the machine has started and is showing the Manual mode
or Automatic mode.
(1) - Connection (2) - Control
(3) - Firmware version
(3) – Firmware version (4) - Software version
867
V03.94
2017-01-19
OP3000
A03
2014-11-27
To Next Page
Loading...
Need help?
General
