Programming Commander DELTA
104 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
5.7 Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1. Tap the symbol to bring up the navigation pane.
This opens the navigation interface.
Fig. 55: Using Automatic mode (1)
2. Tap Automatic mode (1).
The interface of Automatic mode opens. The program
stored last is loaded.
The display shows tiles and information below the upper bar
that vary with the selected program:
(1) - Automatic mode
To Next Page
Loading...
