Maintenance
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 141
You can order the lubricating oil from our sales offices using the
following part numbers.
6.2.1 Lubricating the machine head
Proper setting
The oil level is between the minimum level marking and the
maximum level marking.
Fig. 63: Lubricating the machine head
To lubricate the machine head:
1. Check the oil level indicator at the inspection glass every day.
2. If the inspection glass lights up red, the machine is not
sufficiently supplied with oil.
3. If the oil level is below the minimum level marking (3):
Pour oil through the refill opening (1) but no higher than the
maximum level marking (2).
Container Part no.
250 ml 9047 000011
1 l 9047 000012
2 l 9047 000013
5 l 9047 000014
(1) - Refill opening
(2) - Maximum level marking
(3) - Minimum level marking
To Next Page
Loading...
