Operation
48 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
4.14 Sewing
Fig. 25: Sewing
The pedal starts and controls the sewing process.
WARNING
Risk of injury from the needle if sewing is
started unintentionally!
Puncture possible.
Do not press the pedal when you fingers are in
the area of the needle tip.
(1) - Position +1
(2) - Position 0
(3) - Position -1
(4) - Position -2
Condition Processes
Before starting sewing
Initial situation • Pedal in rest position (position 0)
Machine is at a standstill
Needle is up. Sewing feet down.
Positioning the
sewing material
• Press the pedal halfway back (position -1)
The sewing feet are lifted.
• Position the sewing material.
• Release the pedal.
Sewing feet are lowered onto the sewing material.
At seam beginning
To Next Page
Loading...
