Programming Commander DELTA
106 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
5.7.1 Sewing in Automatic mode
To sew in Automatic mode:
1. Select the program.
2. Press the pedal forward and sew.
You can see the following on the control panel:
Fig. 57: Sewing in Automatic mode
Adjustment factors that can still be adjusted
during the seam
Grayed-out tiles for information on the set
parameters can be adjusted by programming
( p. 108).
Dark gray tiles can only be activated or deacti-
vated. You define which tiles will be visible by
programming ( p. 108).
Symbol/Icon Meaning
(1) - Progress in the segment (2) - Progress in the program
To Next Page
Loading...
