Operation
22 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
4.4 Inserting/changing the needle
4.4.1 On 1-needle machines
Fig. 4: Inserting/changing the needle
CAUTION
Risk of injury from sharp parts!
Puncture possible.
Switch off the machine before you insert or
change the needle.
NOTICE
Property damage may occur!
There is a risk of machine damage, needle breakage or
thread breakage if the distance between needle and hook tip
is incorrect.
Set the distance to the hook tip after inserting a needle with
a different strength.
(1) - Needle bar block
(2) - Screw
(3) - Groove
(4) - Hook
To Next Page
Loading...
