Operation
44 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
4.11 Sewing backwards with the stitch regulator
(optional)
The electronic stitch regulator on the machine arm reduces the
stitch length down to sewing backwards in the lower end position.
Fig. 22: Sewing backwards with the stitch regulator
1. Slowly push the stitch regulator (1) down.
The stitch length becomes smaller. In the lower end position,
the machine sews backwards with the set stitch length.
4.12 Setting quick stroke adjustment (optional)
On machines equipped with a knee button, the knee button can
be used to switch on the increased sewing foot stroke.
You can assign functions to the knee button in the software using
the control panel of the machine.
(1) - Stitch regulator
To Next Page
Loading...
