Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 73
5.4.2 User login
The factory setting of the software is such that the Default User
will be logged in automatically when the machine is switched on.
This does not require any type of authorization. The following
explains how you can switch users.
To access User Management:
1. Tap the symbol to bring up the navigation pane.
This opens the navigation interface.
Fig. 46: User login (1)
2. Tap Logout (1).
This opens the Login interface.
(1) - Logout
To Next Page
Loading...
