Programming Commander DELTA
74 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
There are three ways to log in. The three options - including
the necessary settings in the software - are described below.
5.4.2.1 Logging in with username and password
Assigning a username and password
To assign a username and password:
1. Create a new user in User Management and assign this
user a username and password ( p. 70).
The user can log in immediately with this login information.
Login in with username and password
To log in with username and password:
1. Enter username and password.
2. Tap .
If the login information is correct, the user will be logged in.
5.4.2.2 Login in with a USB key
Assigning a USB key to a user
To assign a USB key to a user:
1. Select a user in User Management or create a new user
( p. 70).
2. Tap the item Login with USB key.
A new window opens.
3. Plug the USB key into one of the ports on the control panel.
4. Select the USB key you wish to assign to the user for login
purposes.
5. To assign the USB key, tap Pair.
The window disappears, and the function Login with
USB key is active.
To Next Page
Loading...
