DURKOPP ADLER M-Type Delta D867 - Setting the Language

Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 57
3. Tap the item User Configuration (2) on the left.
 You are in the User Configuration.
5.3.1 Setting the language
Here, you can set the language of the software.
Fig. 31: Setting the language (1)
To set the language:
1. Tap on the language indicator (1).
 A list holding the language selection opens:
Fig. 32: Setting the language (2)
2. Tap on the desired language.
 The language of the control panel is changed immediately.
(1) - Language indicator
①