DURKOPP ADLER M-Type Delta D867 - Setting the Hook Thread Tension

Operation
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 41
4.8.2 Setting the hook thread tension
Fig. 19: Setting the hook thread tension
The hook thread tension is generated by the tension spring (1)
and adjusted via the screw (2).
To set the hook thread tension:
1. Turn screw (2).
• Increasing the tension: turn screw (2) clockwise
• Reducing the tension: turn screw (2) counterclockwise
WARNING
R i s k o f i n j u ry f r o m n ee d l e t i p a nd m o v i n g pa r t s !
Puncture, cutting and crushing possible.
Switch off the machine before setting the hook
thread tension.
(1) - Tension spring (2) - Screw
②①