Programming Commander DELTA
52 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
5.2 Navigating the Commander DELTA control
panel
You navigate the control panel by tapping the screen with your
fingers. There is no need for an input device.
You can open menus by tapping the corresponding button with
your finger. You switch between the different pages of the main
screen by swiping with one finger.
You can modify the information displayed in the status bar (1).
You can also adjust the tiles shown on the three pages of the main
screen (2). You customize the information using the control panel
settings, p. 78.
Fig. 27: Navigating the Commander DELTA control panel
(1) - Status bar (2) - Main screen
To Next Page
Loading...
