Decommissioning
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 169
8 Decommissioning
You need to perform a number of activities if the machine is
to be shut down for a longer period of time or completely
decommissioned.
To decommission the machine:
1. Switch off the machine.
2. Unplug the power plug.
3. If applicable, disconnect the machine from the compressed
air supply.
4. Remove residual oil from the oil pan using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the control to protect it from soiling.
7. Cover the entire machine if possible to protect it from contam-
ination and damage.
WARNING
Risk of injury from a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect
the machine.
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact
with skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
To Next Page
Loading...
