DURKOPP ADLER M-Type Delta D867 - Cleaning the Filter Element

Maintenance
146 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
6.3.3 Cleaning the filter element
Fig. 67: Cleaning the filter element
To clean the filter element:
1. Disconnect the machine from the compressed air supply.
2. Drain the water-oil mixture ( p. 144).
3. Loosen the collection tray (2).
4. Loosen the filter element (1).
5. Blow out the filter element (1) using a compressed air gun.
6. Wash out the filter tray using benzine.
7. Tighten the filter element (1).
8. Tighten the collection tray (2).
9. Tighten the drain screw (3).
10. Connect the machine to the compressed air supply.
NOTICE
Damage to the paintwork from solvent-based cleaners!
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter
tray.
(1) - Filter element
(2) - Collection tray
(3) - Drain screw
①
③
②