Maintenance
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 145
Fig. 66: Draining the water-oil mixture
To drain the water-oil mixture:
1. Disconnect the machine from the compressed air supply.
2. Place the collection tray under the drain screw (3).
3. Loosen the drain screw (3) completely.
4. Allow the water-oil mixture to drain into the collection tray.
5. Tighten the drain screw (3).
6. Connect the machine to the compressed air supply.
(1) - Filter element
(2) - Collection tray
(3) - Drain screw
To Next Page
Loading...
