Operation
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 25
Order
Always adjust the clearance between the hook and the needle after
changing to a different needle strength ( Service Instructions).
Disturbance
An incorrect hook clearance can cause the following disturbances:
• Changing to a thinner needle:
• Skip stitches
• Thread damage
• Changing to a thicker needle:
• Damage to the hook tip
• Damage to the needle
4.5 Threading the needle thread
Information
You will find a video with instructions regarding this chapter on
the Commander Delta control panel of the machine.
To start the instructional video:
1. Switch on the machine.
2. Click on the tile on the control panel.
A window opens named Threading: one needle.
The instructional video starts automatically.
3. Click on the tile in the left menu bar.
WARNING
R i s k o f i n j u ry f r o m n ee d l e t i p a nd m o v i n g pa r t s !
Puncture, cutting and crushing possible.
Turn off the machine before threading the thread.
To Next Page
Loading...
