Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 61
5.3.6 Setting the screen configuration
The screen configuration is used for the display of the tiles in
Manual mode.
The setting is explained at the appropriate place in the chapter
on Manual mode ( p. 78).
5.4 User Management
The User Management section allows you to create users and
roles with different authorizations.
The factory setting is such that the Default User will automat-
ically be logged in when the machine starts. You can change
this setting at the Technician level as needed.
The following is an explanation of the user
Default Technician, who is set up as the default user.
You can set up any number of users and roles that meet your
individual requirements.
Requirement for User Management administration: You have to
be logged in as the Default Technician.
To log in as the Default Technician:
1. Tap the symbol to bring up the navigation pane.
This opens the navigation interface.
To Next Page
Loading...
