Maintenance
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019 139
Fig. 62: Areas requiring special cleaning
Areas particularly susceptible to soiling:
• Cutter on the winder for the hook thread (4)
• Area under the throat plate (3)
• Hook (2)
• Area around the needle (1)
To clean the machine:
1. Switch off the machine at the main switch.
2. Remove any lint and thread remnants using a compressed
air gun or a brush.
Important
If you wish to clean the machine with cleaning agents, do not
use just any cleaner. To prevent damage to the surfaces, use
the cleaner MONOCLEAN X400. Follow the instructions on how
to use this cleaning agent to prevent damage to the machine.
(1) - Area around the needle
(2) - Hook
(3) - Area under the throat plate
(4) - Cutter on the winder
To Next Page
Loading...
