Programming Commander DELTA
66 Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
5.4.1.1 Managing roles
If selecting User Management as a Default Technician
( p. 56), you will be presented with the following interface:
Fig. 43: Managing roles
Tap the tab (1) reserved for the Roles on the left-hand side.
Deleting a role
To delete a role:
1. Tap the desired role.
The role is highlighted in blue.
2. Tap .
The role disappears from the list; it has been deleted.
Information
Roles with a symbol behind their names have been created
at the factory. They cannot be deleted.
(1) - Tab for roles
To Next Page
Loading...
